Featured Product:
Not Featured
ShowWarrantyRow:
ShowSizeItRight:
ShowDownloadInfo:
ShowHistory:
Hot water where you need it
Stiebel Eltron DHC Classic tankless water heaters are designed for installation at the point-of-use. This heater heats water instantaneously as it flows through the unit. Stand-by heat losses are completely eliminated.
Ultra-reliable performance
The heating element is controlled by a flow switch which means a DHC Classic can never dry-fire and fail prematurely. And since all of these models are hydraulically controlled, operation is quiet. These water heaters are equipped with a safety high-limit with manual reset. The rugged all copper design ensures many years of reliable service.
Easy to Size for Point-of-Use Applications
DHC Classic can deliver warm or hot water to a single point-of-use, usually a hand wash or utility sink. Click the map for the full Sizing Guide.
Call Stiebel Eltron at 800.582.8423 if you have any sizing questions, or if you have any out-of-the-ordinary situation. Stiebel Eltron service representatives can make recommendations on sizing, or provide assistance with our water heaters, to both homeowners and professional installers.
Low flow = big savings
DHC 3-1, DHC 3-2 and DHC 4-2 Classic models are shipped with 0.5 GPM pressure compensating flow reducer/aerators that fit on most faucets. Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters. No pressure relief valve, drains, or circulating pumps needed.
Applications
These tankless water heaters are ideal for restrooms or kitchenettes in an office or commercial / industrial setting:
- Office Buildings
- Gas Stations
- Stores
- Schools
- Malls
- Hotels / Motels
- Warehouses
- Commercial Condominiums
- Restaurants
- Manufacturing Facilities
In a residential setting, they are suited for the following applications:
- Bathroom Sinks
- Kitchen Sinks
- Laundry Areas
- Small Cabins
- Boats / RVs